Table of Contents
The first step is to determine whether or if your laptop’s graphics card is upgradable, and then to obtain a more powerful GPU than the one currently in use. Uninstall your current GPU and its drivers, install the new one and its drivers, and then reinstall the old one.
If you follow the directions in this article, replacing the graphics card on a laptop is a piece of cake.
How To Install Graphic Cards In Your Laptop?
Step 1: Check For Graphic Cards
To begin, check to see if your laptop and the new graphics card are compatible, which can be a challenge.
There is a specific graphics card in every laptop, and each one has its own set of features. Determine if you can upgrade your laptop before getting a new graphics card so that you know which cards are compatible with your computer. The specifications page contains all of the pertinent information.
Check your laptop’s specifications to see if it has enough PCI Express expansion slots for the graphics cards you intend to use. The row of PCI slots immediately adjacent to the CPU is where you’re most likely to find this slot.
There is no way to enhance your graphics unless you have these slots. There are two options if this is the case: You may either buy a new laptop or replace the motherboard on the one you already have.
Step 2: Remove or disable any outdated drivers from your computer
When updating graphics cards, driver incompatibility is the most common cause of difficulties. You must thus delete the present graphics card drivers from the operating system before you can proceed.
If you want to uninstall your video card’s drivers quickly and painlessly, follow these steps:
- By hitting Windows key + I, you may access the device manager. By pressing the Windows logo key and X, or by searching in the search box, this can be performed.
- When presented with a drop-down selection, choose Device Manager as your application.
- You may learn more about the Display Adapters option by double-clicking on it.
- You may remove the display adapter by right-clicking on it and selecting Uninstall device from the context menu that appears.
- Follow the on-screen directions to remove the old display adaptor.
- Turn off the computer and go on to the next step of the project.
- If you don’t restart your laptop after installing the drivers, they will be reinstalled automatically.
Step 3: Replace the old graphics card from your computer
Installing a new graphics card on your computer requires uninstalling your current one unless you’re starting from scratch. Don’t be fooled into thinking it’s an easy task if you’ve never done one before. The following section is really important, and you must pay great attention to it.
Dispose of any wires that may have remained after the work was done. Before you do anything else, detach those screws that hold your old graphics card to the PCI Express backplate and put it away for the time being. To remove screws, the most efficient method is to use a screwdriver or, if the screws are thumbscrews, your fingers. Screws will be required to complete the installation of a new graphics card.
An old-school GPU will almost always be held in place with the aid of a clip. This clip must be released before the graphics card can be removed from the computer. Under the graphics chip, it’s usually found near the end of the PCI slot, near the bottom.
How To Replace Graphic Card In Your Laptop?
Currently, this is the most critical step in the entire procedure. If you make even the smallest mistake, it might spell doom for the entire project. In order to avoid electrostatic discharge harm, you may need to ground yourself.
Step 1: The card used to display graphics
An anti-static pouch will almost certainly be included with the purchase of a new memory card. Taking care not to damage any of the device’s vital components, slowly and gently remove it.
Following these instructions will ensure that you have successfully installed the software:
- To avoid damaging your new PCI-Express slot, take care not to overtighten it.
- Squeeze it one last time to make sure it’s in the right spot.
- To keep the GPU in place, all clips on the motherboard will automatically snap into place when the GPU is inserted correctly.
- Remove the adjacent panel to make room for a larger GPU when installing a new one.
- When installing a new graphics card, remove the screws that kept the old one in place and secure it to the motherboard with those screws.
- You should make sure that all of your laptop’s available power ports are connected before shutting it off.
Step 2: Drivers should be updated regularly
Make sure the GPU is in the correct place and the power wires are correctly connected before shutting down the laptop. Make any necessary adjustments to the resolution and color depth of the display when your operating system recognizes the new graphics card
Step 3: You may need to debug your installation if the display looks to be skewed
It’s possible to utilize a driver disc or the internet to get the latest versions of your drivers. Installing a driver is as simple as inserting a disc into your computer and following the on-screen instructions that appear when you do so. Depending on the GPU you purchased, you can also download and install the latest graphics card drivers from NVIDIA or AMD. Upon completion of the installation, you may want to run a test on your new graphics to make sure everything is working properly.
In order to assist you in properly installing a graphics card on your laptop, we’ve put together this instructional video. Take your time with this. Don’t risk damaging your computer by skipping a step in the process.
ALSO READ: Best Bluetooth Earphones For Small Ears!